Oranjewerf Ship Repair

“Weegtoren 1″

Tibor — Fri, 16 Mar 2012 15:00:02 +0000

Scope of work:
- High pressure washed, spot hydro blasted and painted the barge;
- Replaced anodes;
- Renewed steel of cooling water inlet chest;
- Installed new cooler.

Type: Elevator barge.
Dimensions: 17 * 17 * 1,8 m.
Owner: Igma Bulk Terminal.
Work executed: March 12th – 16th 2012.

“EDT Protea”

Tibor — Fri, 03 Feb 2012 15:07:28 +0000

Scope of work:
- Periodic class survey;
- Construction + installation of new 5t crane foundation;
- Installation of 5t crane;
- Installation of foam monitor on heli deck + pipework and tank;
- Construction + installation of winchplatform taut wire system;
- Construction + installation of Davit foundation for FRC;
- Installation of new FRC davit and boat;
- High pressure washing + painting of hull and topside;
- Inspection/load test cranes,gangways/a-frame’s;
- Overhaul 4 main engines;
- Overhaul + inspection of overboard valves.

Type: Offshore Diving Support vessel.
Dimensions: 91,20 x 14,80 x 6.50 m.
Owner: EDT Offshore LTD.
Work executed: January 13th – Febuary 3rd 2012.

“MNO Zeezand”

Tibor — Tue, 10 Jan 2012 11:56:03 +0000

Scope of work:
- Dis-assembly/assembly of Propeller shaft due to seal renewal;
- Repairs to CPP blades;
- Periodic maintenance, class inspection and survey;
- High pressure washing / Painting of Bottom, immersed hull and sides;
- Maintenance/repairs to bottom doors.

Type: Cutter suction dredger.
Dimensions: 82 x 11,5 m.
Owner: Spaansen Materieel en Techniek B.V.
Work executed: January 1st – 10th 2012.

“Joost Nelis”

Tibor — Mon, 09 Jan 2012 13:55:28 +0000

Scope of work:

- Various hull damages, replaced hull parts and frames.
- Vacuum tested hull after repears;
- Repairs on spud pole casings, spud poles removed and stored on yard;
- Overhauling of 4 spud poles, various lengths renewed;
- High pressure washing/sanding/painting of hull and submersed sides;
- Aluminium hatch repairs, dis assembly/straitening/welding/
rubber replacement/assembly.

Type: Work jack-up rig
Dimensions: 30 x 12 x 2,5 m.
Owner: De Ruiter Bedrijfsmaterieel B.V.
Work executed: November 14th – December 22th 2011.

“Triton”

Tibor — Sun, 08 Jan 2012 15:05:22 +0000

Scope of work:

- Assistance to “Schottel” with solving leak on PS thruster;
- Touch up on hull paint and anti-fouling.

Type: Harbour tug.
Dimensions: 33 x 13 x 4,3 m.
Owner: Iskes Towage & Salvage.
Work executed: November 28th - December 2nd 2011.

“HAM 601″

Tibor — Tue, 27 Dec 2011 10:50:16 +0000

Scope of work:
- Periodic class survey;
- High pressure washing + painting of hull and topside;
- Hydro blasting + conservation of stone dumping slide doors / dumping decks;
- Dis assembly of “Voith Sneider” propulsion units, forward + aft;
- Overhauling of “Voith Sneider’s” in the yards machine workshop.
- Azimuth alignment of Voith Sneiders, main- and auxiliary-engines;
- Replacement of cathodic protection system;
- Copying, galvanization and fitting of a cooling water pipe;
- Fitting/installation of a cooling water pump + pipe fitting work;
- Adjustment of hawse pipe construction, due to clasping of anchor;
- Gangway damage, welding of aluminium;
- Fabricating of 1 x lube oil tank with 5 compartments;
- Steel thickness measurements of various stone dumping compartments;
- Delivery and machining of stainless steel plates for galley refrigeration.

Type: Side Stone Dumping vessel.
Dimensions: 62.50 x 15.80 x 3.50 m.
Owner: Van Oord Ship Management B.V.
Work executed: October 28th - December 27th 2011.

“Clipper Stad Amsterdam”

Tibor — Fri, 11 Nov 2011 12:08:50 +0000

Scope of work:
- Periodic class survey;
- Dis assembly of propeller shaft due to C.P.P. maintenance;
- Polishing + crack tests of C.P.P. blades;
- Dis-assembly of rigging for maintenance;
- Various steelwork on deck;
- Grid blasting and repainting of bowthruster room;
- High pressure washing, hydro blasting and painting of under water area and topside;

Type: Sailing clipper.
Dimensions: 78 x 10 x 4,8m.
Owner: Rederij Clipper Stad Amsterdam.
Work executed: October 14th – November 11th 2011.

“Rio”

oranjewerf — Fri, 09 Sep 2011 11:10:47 +0000

Scope of work:
- Repaired leaking Aquamaster thruster;
- Repaired damaged bow thruster.

Type: Cutter suction dredger.
Dimensions: 82 x 16 x 3,0 m.
Owner: Rio Zand & Grind.
Work executed: September 7th – 9th 2011.

“Sirius”

oranjewerf — Thu, 04 Aug 2011 11:02:31 +0000

Scope of work:
- Grid blasting and painting of under water area and topside;
- Cleaning and cementing of drinking water tank;
- Replacing all zinc anodes;
- Modifying stern bulwark;
- Modification of stern fendering.

Type: Harbour tug.
Dimensions: 26 x 8,8 x 4,3 m.
Owner: Iskes Towage & Salvage.
Work executed: June 28th – August 4th 2011.

“Kraan 2 & Weegtoren 2″

oranjewerf — Fri, 29 Jul 2011 12:10:54 +0000

Scope of work:
- High pressure washed, hydro blasted and painted the barges;
- Replaced several pieces of fendering;
- Replaced numerous pieces of steel plating in hull and bulkheads;
- Replaced anodes;
- Renewed and overhauled valves and pipe work.

Type: Crane- and elevator barges.
Dimensions: 36 x 17 x 1,4 m and 17 * 17 * 1,8 m.
Owner: Igma
Work executed: July 13th – 29th 2011